           Recommended Flash BIOS Management & Updating Procedures
----------------------------------------------------------------------------

A.Updating BIOS procedures (only when necessary):

1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from the
   DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.

2. Download an updated BIOS file (from the Internet Web Site) which
   including FLASHIT.EXE, BIOS.ROM, then save to the diskette you created above.

3. Boot from the floppy diskette you created above.

4. At the "A:\" prompt, type: FLASHIT BIOS.ROM then the <Enter> key.

5. After BIOS flashed successly, the system will be turned off automatically.

6. Turn on your computer and hold down the <Ctrl>+<Alt>+<S> key
   to enter System Configuration Utility (SCU).

   You must select "Default Settings" in [Exit] item to affect the new BIOS,
   then you may set other items in the SCU Menu.

7. Select "Save and Exit" item to quit the System Configuration Utility.


B.FLASHIT serial number file :

1. Create a bootable system floppy diskette by typing [FORMAT A:/S] 
   from the DOS prompt without creating "AUTOEXEC.BAT" and 
   "CONFIG.SYS" files.

2.Update OEM Serial Number File, like ser.txt(Must equal or less 
  than 16 bytes)

3. Boot from the floppy diskette you created above.

4. At the "A:\" prompt, type: flashit /s:Serial Number file and then 
   the <Enter> key.
   LIKE A:>FLASHIT /S:ser.txt